PRS 101 CÔNG TẮC GIẬT DÂY BĂNG TẢI KIEPE

PRS 001 Kiepe Việt Nam

Ứng dụng sản phẩm:

Kiepe pull-rope emergency stop switches type PRS are used in accordance with the requirements of EN 620 as well as BGI 710 and in conformity with DIN EN ISO 13850 as emergency stop devices as supplementary safety measures on conveyor belt systems. The pull rope is symmetrically tensioned on both sides of the red release lever

After the emergency stop function is triggered, the switching mechanism is locked in the shut-off position „0“. The signal lamp in the lid of PRS 101 or 102 is switched on. When the blue reset lever is actuated in switch position „1“, the switching contacts are reactivated, the signal lamp is off and the conveyor belt is prepared for being turned back on again.

Resetting the pull-rope emergency stop switch must not cause the conveyor system to start up.

Belt Conveyor Pull Rope Switch Kiepe Việt Nam

Công tắc giật dây Kiepe PRS 001

Mounting:

Pull-rope emergency stop switches of types PRS are centered between the anchor hooks 3 of the pull-rope system and each fastened to the substructure in installation position with 2x M6 screws.

Electrical connection is performed with the device open using the screwed cable gland included in the delivery, directly on the terminal block [X10] to [X22] (see the connection drawings).

The signal lamp of DC-Variant PRS 102 can be connected without regarding the polarity of the voltage.

Công tắc dừng băng tải Kiepe PRS 102 

Kiepe Elektrik Kiepe PRS 001 Việt Nam

Kiepe Germanu

Order number

Pull rope switch PRS 101 Kiepe Việt Nam

Kiepe Việt Nam

PRS 102 Kiepe

Đại lý Kiepe